SMT Line Anschluss
Automatischer Magazinlader
Automatischer Magazinlader für stabile Leiterplattenbeladung und reibungslosen Produktionsfluss. Ausgestattet mit SPS-Steuerung, Servo-Hubsystem und SMEMA-Schnittstelle für nahtlose Linienintegration.
Beschreibung des Produkts
The Automatic Magazine Loader automates PCB transfer from magazine racks to downstream SMT equipment — eliminating manual handling, reducing errors, and keeping your production line running at full speed. Compliant with SMT best practices and IPC industry standards for automated board handling.
PLC-Touch-Steuerung
Intuitive touch screen interface with real-time status monitoring. No specialized training required — operators configure and run in minutes.
Motorized Lifting
Selectable pitch of 10 / 20 / 30 / 40 mm. Compatible with a wide range of PCB sizes and magazine configurations used across the industry.
SMEMA-Schnittstelle
Standard SMEMA communication for plug-and-play integration with any upstream or downstream SMT equipment — no custom wiring needed.
Robust Construction
Sheet-metal frame with aluminum components. Minimized vibration protects even the most delicate 0.4 mm thin boards during transfer.
Eliminate the #1 SMT Bottleneck
Manual PCB loading forces operators to repeatedly retrieve boards, align them, and feed equipment — all while racing against cycle times. One misalignment can cascade into downstream defects.
- Reduce labor cost & fatigue
- Consistent 5-second feed intervals
- Zero board misalignment on input
- Frees operators for higher-value tasks
Built for Any Production Scale
From high-volume consumer electronics to precision industrial PCB assembly. Handles boards 50 – 535 mm wide and as thin as 0.4 mm, fitting prototype runs and mass production alike.
Technische Höhepunkte
Schlüsselspezifikationen, die Exzellenz definieren
PCB-Ladezeit
PCB-Breitenbereich
Arbeitshöhe
Format der Zeitschrift
Minimale PCB-Dicke
Erforderlicher Luftdruck
Wesentliche Merkmale
Fortschrittliche automatische Ladetechnik für die SMT-Produktion
Automatisches PCB-Laden
Automatische Übergabe der Leiterplatten aus den Magazinständern an den nächsten Prozess, eine nach der anderen.
PLC-Touchscreen-Steuerung
Benutzerfreundliches PLC-System mit Touchscreen für intuitive Bedienung.
Motorisierte Hebevorrichtung
Stabiles Hebesystem mit wählbaren Teilungsoptionen (10mm, 20mm, 30mm, 40mm).
PCB-Schutzdesign
Zylinder/Motor-Förderverfahren mit Puffermechanismus zum Schutz der Leiterplatten vor Beschädigung.
Magazinhandhabung von unten nach oben und von oben nach unten
Effizienter Austausch von Magazinständern für eine verbesserte Produktionseffizienz.
SMEMA-Schnittstelle
Standard-SMEMA-Kabel für reibungslose Kommunikation mit anderen Geräten.
Spezifikation
Vollständige technische Daten und Merkmale.
| Artikel | Specification and Description |
|---|---|
| Modell | STJ-460 |
| Abmessungen der Maschine (mm) | L1800 × W970 × H1250 |
| Größe der Leiterplatte (mm) | 50×50 ~ 535×460 |
| Behältergröße (mm) | 535 × 530 × 569 |
| Spezifikation Positionen | Spezifikation |
|---|---|
| Platinenladezeit | 5.0 sec |
| Arbeitshöhe (mm) | 920 ± 30 (std) |
| Power Supply | AC 220V ± 10V, 50/60 Hz |
| Druck der Druckluft | 4 – 6 bar |
| Dicke der Leiterplatte | Minimum 0.4 mm |
Automatischer Magazinlader
High-efficiency Automatic Magazine Loader for SMT production lines. Sanco provides robust PCB loading equipment with PLC control and SMEMA interface.
Produkt SKU: Automatischer Magazinlader
Produktmarke: SANCO
Produkt auf Lager: InStock