Not every dispensing job needs a full production line. For low-to-mid volume work, prototyping, or processes that still benefit from a skilled operator’s touch, a compact desktop dispensing robot often makes more sense than a large inline system — as long as it doesn’t compromise on accuracy or repeatability. The TS5331-1, now available with an integrated safety light curtain, is built around exactly that trade-off: bench-top footprint, industrial-grade precision, and a safeguard that lets operators work close to the machine with confidence.
What Is the TS5331-1 Desktop Dispensing Robot?
The TS5331-1 is a semi-automatic, four-axis dispensing platform that integrates precision mechanics with automatic motion control and dispensing management. A motion controller drives the servo/stepper system and working platform along a programmed trajectory, while a built-in glue supply controller works together with the glue storage bucket and dispensing valve or needle to control the extrusion of adhesive, precisely and consistently, shot after shot.
Because the whole system runs as a stand-alone machine, it doesn’t require an external computer to operate — program, teach, and run dispensing paths directly from the machine itself. That self-contained design is part of what makes it a practical fit for smaller electronics manufacturers, contract assemblers, and workshops that want production-grade dispensing without production-line complexity.
Key Advantages of the TS5331-1
| Advantage | Detail |
|---|---|
| 독립 실행형 운영 | No external computer required — easy to install and easy to operate right out of the box. |
| Humanized Teaching Box | Graphic-key teach pendant simplifies dispensing path setup for operators of any experience level. |
| Matrix Copying & Offset Correction | Quickly duplicate dispensing patterns, adjust offsets, and set correction points without reprogramming from scratch. |
| Program Transfer Between Machines | Paths and settings can be shared across multiple dispensers, cutting setup time on new units. |
| 3D 아크 보간 | Professional-grade control system enables smooth, accurate dispensing along curved and angled paths. |
| 광범위한 밸브 호환성 | Configurable with a range of dispensing valves to match different fluids and application needs. |
| On-Table Needle Control | An onboard needle control button (optional) allows debugging without an external teach pendant, faster than comparable machines. |
| Integrated Safety Light Curtain | Monitors the work zone and halts motion if the operator’s hands enter the machine’s active path. |
Built-In Safety: Why the Light Curtain Matters
Desktop dispensers sit close to the operator, which makes hand and finger safety a real concern on any manual-load station. The TS5331-1’s safety light curtain continuously monitors the working area and immediately stops axis motion if that boundary is broken during a cycle. It’s a simple addition, but it removes one of the biggest risks of bench-top dispensing without slowing the operator down or adding extra steps to the workflow — a detail that matters as much on an audit checklist as it does on the shop floor.
Programming Made Simple
Path programming is handled through a hand-held teaching box with a graphic-key interface, so operators can set dispensing paths, copy patterns across a matrix layout, and fine-tune correction points without needing to write code. Combined with 128M of onboard program storage, the machine can hold a library of jobs ready to recall as products change over on the line. For facilities running several TS5331-1 units, or replacing an older dispenser, programs can be transferred machine to machine, so a validated path doesn’t have to be rebuilt from scratch every time a new unit comes online.
기술 사양
| 항목 | 사양 |
|---|---|
| 모델 번호. | TS5331-1 |
| 차원 | 580 × 485 × 650 mm |
| 순 중량 | 30 kg |
| 최대 속도 X/Y/Z | 500 mm/s (X/Y); 300 mm/s (Z) |
| 반복성 | ±0.05 mm |
| Position Accuracy | ±0.05 mm |
| Z Maximum Load | 3 kg |
| Orbit Parallelism | 0.5 mm |
| 거리 범위 | 500 × 300 × 100 mm |
| Drive Mode | Stepper motor + synchronous belt + linear slide |
| I/O | 8 input / 8 output |
| Program Storage | 128 M |
| 프로그래밍 | Hand-held editor |
| 전원 | AC220V / 50Hz / 0.5KW |
| 환경 | -20°C to 40°C; relative humidity 20%–90% |
Where This Technology Delivers the Most Value
The TS5331-1 fits naturally into low-to-mid volume production, R&D and prototyping benches, and repair or rework stations where flexibility matters as much as precision — general electronics assembly, connector and sensor potting, small-part bonding, and similar bench-top adhesive or sealant applications. For boards that also need full-surface protective coating rather than point or line dispensing, our 3D digital printing conformal coating platform is worth a look as a complementary process, and our broader 애플리케이션 솔루션 page covers how dispensing, coating, and curing come together across different manufacturing scenarios.
Manufactured in Shenzhen, Supporting Customers Worldwide
The TS5331-1 is designed and built at Shenzhen Sanco Technology Co., Ltd.’s own manufacturing facility in Shenzhen, China — a base that lets us control quality from component sourcing through final testing on every unit that ships. Sanco has been developing precision dispensing, coating, and curing equipment since 2015, and that factory now supports customers across a wide range of countries and regions, from electronics contract manufacturers to specialized assembly shops with very specific process requirements.
Because so much of our business is international, service doesn’t stop at the factory gate. Our team supports installation guidance, operator training, and troubleshooting for customers wherever they’re located, and spare parts and technical documentation are organized so a machine bought today can still be serviced years down the line. Equipment is built to meet international safety and quality expectations, including ISO 9001:2015 quality management and CE marking, so buyers evaluating a desktop dispensing robot for an export-facing production line have a documented baseline to check against.
If you’d like to see more about the company behind the machine — our history, factory, and the industries we serve — our about page has the full picture. For a specific question about fitting the TS5331-1 into your process, our team is glad to walk through material compatibility, cycle time, and layout before you commit to a machine.
Compact, safe, and precise, the TS5331-1 brings production-line dispensing discipline to the desktop — backed by a factory and a support team built for customers working across borders. See full specs and options on the TS5331-1 product page.
