การเชื่อมต่อสายการผลิต SMT
เครื่องบรรจุแม็กกาซีนอัตโนมัติ
เครื่องโหลดนิตยสารอัตโนมัติที่ออกแบบมาเพื่อการโหลด PCB อย่างเสถียรและกระบวนการผลิตที่ราบรื่น ติดตั้งระบบควบคุม PLC, ระบบยกเซอร์โว และอินเทอร์เฟซ SMEMA สำหรับการผสานเข้ากับสายการผลิตอย่างไร้รอยต่อ.
รายละเอียดสินค้า
The Automatic Magazine Loader automates PCB transfer from magazine racks to downstream SMT equipment — eliminating manual handling, reducing errors, and keeping your production line running at full speed. Compliant with SMT best practices and IPC industry standards for automated board handling.
การควบคุมด้วยหน้าจอสัมผัส PLC
Intuitive touch screen interface with real-time status monitoring. No specialized training required — operators configure and run in minutes.
Motorized Lifting
Selectable pitch of 10 / 20 / 30 / 40 mm. Compatible with a wide range of PCB sizes and magazine configurations used across the industry.
อินเตอร์เฟซ SMEMA
Standard SMEMA communication for plug-and-play integration with any upstream or downstream SMT equipment — no custom wiring needed.
Robust Construction
Sheet-metal frame with aluminum components. Minimized vibration protects even the most delicate 0.4 mm thin boards during transfer.
Eliminate the #1 SMT Bottleneck
Manual PCB loading forces operators to repeatedly retrieve boards, align them, and feed equipment — all while racing against cycle times. One misalignment can cascade into downstream defects.
- Reduce labor cost & fatigue
- Consistent 5-second feed intervals
- Zero board misalignment on input
- Frees operators for higher-value tasks
Built for Any Production Scale
From high-volume consumer electronics to precision industrial PCB assembly. Handles boards 50 – 535 mm wide and as thin as 0.4 mm, fitting prototype runs and mass production alike.
ไฮไลท์ทางเทคนิค
ข้อมูลจำเพาะหลักที่กำหนดความเป็นเลิศ
เวลาในการโหลด PCB
ช่วงความกว้างของ PCB
ระดับความสูงในการทำงาน
ขนาดของนิตยสาร
ความหนาขั้นต่ำของแผ่นวงจรพิมพ์
ความต้องการแรงดันอากาศ
คุณสมบัติเด่น
เทคโนโลยีการโหลดอัตโนมัติขั้นสูงสำหรับการผลิต SMT
การโหลด PCB อัตโนมัติ
โอนย้าย PCB จากชั้นวางนิตยสารไปยังกระบวนการถัดไปโดยอัตโนมัติทีละชิ้น.
การควบคุมหน้าจอสัมผัส PLC
ระบบ PLC ที่ใช้งานง่ายพร้อมหน้าจอสัมผัสเพื่อการควบคุมที่เข้าใจง่าย.
โครงสร้างยกด้วยระบบมอเตอร์
ระบบยกที่มั่นคงพร้อมตัวเลือกการปรับระยะยกได้ (10 มม., 20 มม., 30 มม., 40 มม.).
การออกแบบการป้องกัน PCB
วิธีการลำเลียงกระบอก/มอเตอร์พร้อมกลไกบัฟเฟอร์เพื่อป้องกัน PCB ไม่ให้เกิดความเสียหาย.
การจัดการนิตยสารแบบด้านล่างเข้า ด้านบนออก
การเปลี่ยนชั้นวางนิตยสารอย่างมีประสิทธิภาพเพื่อเพิ่มประสิทธิภาพการผลิต.
อินเตอร์เฟซ SMEMA
สายเคเบิล SMEMA มาตรฐานสำหรับการสื่อสารที่ราบรื่นกับอุปกรณ์อื่น ๆ.
ข้อกำหนด
ข้อมูลจำเพาะทางเทคนิคและคุณสมบัติครบถ้วน.
| รายการ | Specification and Description |
|---|---|
| แบบจำลอง | STJ-460 |
| ขนาดเครื่อง (มม.) | L1800 × W970 × H1250 |
| ขนาดแผงวงจร (มม.) | 50×50 ~ 535×460 |
| ขนาดถัง (มม.) | 535 × 530 × 569 |
| รายการข้อกำหนด | ข้อกำหนด |
|---|---|
| เวลาในการโหลดแผงวงจร | 5.0 sec |
| ระดับความสูงในการทำงาน (มม.) | 920 ± 30 (std) |
| แหล่งจ่ายไฟ | AC 220V ± 10V, 50/60 Hz |
| ความดันอากาศอัด | 4 – 6 bar |
| ความหนาของแผงวงจร | Minimum 0.4 mm |
เครื่องบรรจุแม็กกาซีนอัตโนมัติ
High-efficiency Automatic Magazine Loader for SMT production lines. Sanco provides robust PCB loading equipment with PLC control and SMEMA interface.
Product SKU: เครื่องบรรจุแม็กกาซีนอัตโนมัติ
Product Brand: SANCO
Product In-Stock: InStock