SMT Lijnverbinding
Automatische magazijnlader
Automatische magazijnlader ontworpen voor het stabiel laden van printplaten en een soepele productiestroom. Uitgerust met PLC-besturing, servohefsysteem en SMEMA-interface voor naadloze lijnintegratie.
Product Beschrijving
The Automatic Magazine Loader automates PCB transfer from magazine racks to downstream SMT equipment — eliminating manual handling, reducing errors, and keeping your production line running at full speed. Compliant with SMT best practices and IPC industry standards for automated board handling.
PLC-aanraakbediening
Intuitive touch screen interface with real-time status monitoring. No specialized training required — operators configure and run in minutes.
Motorized Lifting
Selectable pitch of 10 / 20 / 30 / 40 mm. Compatible with a wide range of PCB sizes and magazine configurations used across the industry.
SMEMA interface
Standard SMEMA communication for plug-and-play integration with any upstream or downstream SMT equipment — no custom wiring needed.
Robust Construction
Sheet-metal frame with aluminum components. Minimized vibration protects even the most delicate 0.4 mm thin boards during transfer.
Eliminate the #1 SMT Bottleneck
Manual PCB loading forces operators to repeatedly retrieve boards, align them, and feed equipment — all while racing against cycle times. One misalignment can cascade into downstream defects.
- Reduce labor cost & fatigue
- Consistent 5-second feed intervals
- Zero board misalignment on input
- Frees operators for higher-value tasks
Built for Any Production Scale
From high-volume consumer electronics to precision industrial PCB assembly. Handles boards 50 – 535 mm wide and as thin as 0.4 mm, fitting prototype runs and mass production alike.
Technische hoogtepunten
Belangrijkste specificaties die uitmuntendheid definiëren
PCB laadtijd
PCB breedtebereik
Werkhoogte
Formaat tijdschrift
Minimale dikte printplaat
Vereiste luchtdruk
Belangrijkste kenmerken
Geavanceerde automatische laadtechnologie voor SMT-productie
Automatisch laden van printplaten
Brengt PCB's automatisch één voor één over van magazijnrekken naar het volgende proces.
PLC Aanraakschermbediening
Gebruiksvriendelijk PLC-systeem met aanraakscherm voor intuïtieve bediening.
Gemotoriseerde Opheffende Structuur
Stabiel hefsysteem met selecteerbare steekopties (10 mm, 20 mm, 30 mm, 40 mm).
PCB-beschermingsontwerp
Cilinder/motor transportmethode met buffermechanisme om printplaten te beschermen tegen beschadiging.
Bottom-In, Top-Out Magazijnverwerking
Efficiënte magazijnrekwissel voor verbeterde productie-efficiëntie.
SMEMA interface
Standaard SMEMA-kabel voor probleemloze communicatie met andere apparatuur.
Specificatie
Volledige technische specificaties en functies.
| Item | Specification and Description |
|---|---|
| Model | STJ-460 |
| Afmetingen machine (mm) | L1800 × W970 × H1250 |
| Afmetingen printplaat (mm) | 50×50 ~ 535×460 |
| Bin grootte (mm) | 535 × 530 × 569 |
| Specificatie-items | Specificatie |
|---|---|
| Laadtijd printplaat | 5.0 sec |
| Werkhoogte (mm) | 920 ± 30 (std) |
| Voeding | AC 220V ± 10V, 50/60 Hz |
| Persluchtdruk | 4 – 6 bar |
| Dikte printplaat | Minimum 0.4 mm |
Automatische magazijnlader
High-efficiency Automatic Magazine Loader for SMT production lines. Sanco provides robust PCB loading equipment with PLC control and SMEMA interface.
Product SKU: Automatische magazijnlader
Product merk: SANCO
Product op voorraad: InStock